Feeds:
Posts
Comments

Archive for the ‘Measures’ Category

Please forgive the poor scanned image.  The scans are from the actual Journals.  References will be acknowledged regarding the odd “things” which have happened spontaneously when working on this painting, such as the journals were purchased online and the number of blocks were not counted, the image of the journal was a closed book.  Upon receiving the journal, it was opened to reveal a perfect grid for the entire painting.  It seems like a little detail but there are more, many more which facilitate ease in the making of this painting.
THE LAYOUT
 
This is the main canvas design of the painting requires 30-48″ x 48″/4 foot x 4 foot canvases.  The canvases are numbered for ease of work processes.  As noted in the first scan, each small box represents a 6″ x 6″ square within the total 48″ x 48″ canvas.  Twenty canvases are cloth, gallery wrapped canvases 1 1/2 inches thick.  Ten canvases are custom wood which are not made yet.  The wood canvases are designed to carry weight; the weight of cables and the weight of gemstones.  The cable canvases are designed with half moon shaped doors which open vertically to house coiled cables (there will be a blog later regarding these canvases).
 It is easy to lose sections of working canvas within the painting with these small measures.  Later, each canvas will be blown up by zoom for accuracy.  The rough sketch will be placed at various levels to increase the size in steps.  Moving back and forth through the Journal of Measures and The Journal of Sketches will decrease error when the scenes are painted.  The Pale Horse was sketched onto the canvas and after working it out in The Journal of Measures, it was found that the sketch was only one third of the required size!  

This is the main layout measuring a total of 12 feet by 40 feet.  Please comment as needed to help see anything missed in any scan regarding the design process.  This painting involves input and supplies from all over the world.  You have a part in its creation no matter how small.  Please, say what is on your mind and remember:  The only “stupid” question is the one which goes unasked.”  Thank you in advance!

 

 

Read Full Post »

In effort to create precise measurements of individuals of The Revelation Painting, the study of human bone structure lead me to Forensic Anthropology.  It is imperative that I understand the measurements and calculations required to create the correct perspective of various races of human beings.  This study became extremely important in The Four Horsemen scene previously mentioned.
Based on Forensic Anthropology’s scientific calculations, the length of a man (or woman) can be measured by several bones for a relatively accurate overall height.  I used the length of the average Caucasoid male to calculate the total height and reverified by art anatomy standards.  With those two techniques applied I have calculated the height of the white horses’ rider to be 5’7″ based on his position in the painting.
The calculations based on art anatomy are as follows:
Femur (the long bone of the thigh) is on average the length of 2 heads.  In this case, the riders’ head was approximately 8″ in length (top to bottom)= 16″.  Then I used the scientific calculation used in Forensics:
Length of the femur (16″ or 2 heads)X 1.88+32=5’7″.

Now I am able to calculate the height of all riders not only based on their position and persective, but also the base caculation of the white horses’ rider!  Therefore, all measurements will be scientifically correct.

 
The face of the rider will be designed around the general skull shape.  This is what lead me to discover the calculations required for accurate perspective in this massive design.  The bottom of the sketch exhibits the “general” layout of the horses’ areas in this scene.  In the upper left the white horse was estimated by the size of the area it will occupy, then sketched loosely to get an idea of the head size, as noted by the numbers to the left 1-4 (which are feet then unmarked in inches-estimated).

The entire page length of this sketch was suprisingly 8″, the exact size of the skull.  This gave me a raw look at the size of the head which is close to actual human size.  The white horse is the furthest back in the painting…he is receding.  By looking at the size of the black horses’ space and that he is the closest to the viewer, he and his rider will be over 9′ tall…IMAGINE!

I produced an error in the initial calculations.  I was under the impression that the scientific calculation made the length of the femur itself and calculated initally on that finding (in black), then I “saw the light” (in blue) and correctly calculated the length.  Through my research, ancient men used to be shorter in stature than they are now in modern times, so his total height is most likely correct for his time.

Please examine the sketch and if you see ANYTHING you would like to bring to my attention, please do so.

Read Full Post »

CUSTOM MADE WOODEN CANVASES

In creating The Revelation Painting, it was apparent that the weight of the stones and the need for sturdy canvases to hold the fiber optics were going to require wooden canvases.  In the case of the fiber optics requiring small holes drilled from 1-6MM, a cloth canvas would not suffice.  It was estimated that six canvases would be needed to house the fiber optic cables and four to hold the weight of the stones.

Fiber optic cables are delicate and will not tolerate numerous placement and removal as the painting moves from location to location.  The idea to drill holes and securely fasten the delicate cables is what brought me to the design of custom-made wooden canvases with drilled holes to accommodate various sizes of cables fixed securely into place with clear adhesive.

   

 Various sizes and adapters are available to create the light effects from a light source.  Obvious decreased movements and coiling of the frail cables would increase the life of them before replacement was required.  Designing custom canvases 48” x 48” from wood that fit flush with the cloth canvases was no easy task.  Measurements from the side were calculated at 1 ½” combined.

I consider myself an artist and not a carpenter.  It was very difficult for me to try to measure and calculate the needed design as doors were going to have to be on the backs of six canvases to carry the cables securely during transport.  I sketched a rough design and ran an ad for a carpenter, aka woodworker with tools to build the canvases.

 

I need someone to build 10 canvases, high quality 48″x48″x 1 1/2″, some with doors on the back. These canvases will be painted on; fine art and have to be sanded and smooth. Some will have small holes drilled in them. I do not have tools, so you need your own tools. I will buy the supplies at your direction regarding the type of quality, lightweight, non-warping wood required. I have a cloth example (without doors on the back) to go by for design purposes. I will need a quote from you regarding what you will charge for all 10 canvases. I hope that you can deliver them when done or I will rent a truck to pick them up. You will be required to sign a waiver if injury occurs in the creation or delivery of these canvases that I will not be held responsible.

I was amazed at the response!  After a week or so of careful consideration, I chose a man who may or may not be listed in The Journal of Acknowledgement for his significant contribution toward the creation of the painting based on his decision.  (Please see:  www.therevelationpaintingjournals.wordpress.com regarding this powerful journal.)

The most difficult part of designing the canvases are the side frames which can only be 1 ½ inch combined; the ¼” Birch plywood, the frame, and the width of the latch.  The main problem is finding the correct cut with the application of the latches where the canvas is not forced to sit out from the wall at a wider distance than the cloth canvases.  Solid construction is important here due to weigh.

The remaining four canvases are located at the end of the painting where the twelve foundations of crushed gemstones are found.  It will be interesting to calculate the exact weight of the stones.  (I will deduct the weight of the finished wood canvas, the adhesives and lacquers from the total weight after the stones are applied.)  Just carrying the crushed stones reveals pounds of weight!

 

I considered and am still considering tracks of LED lights to illuminate the crushed stones through small holes.  The stones, their magnificence of sparkle and light-play is best observed through illumination.  Time will tell regarding this decision.  Many other components were required as well for the completion of fully functional canvases to withstand the test of time.

The main component of the canvases is of course the wood it is made from.  Several carpenters recommended Birch.  I did not know much about Birch, only that I needed a wood that would not warp, could handle the weight and liquid applied to its surface.  I researched Birch and found interesting facts.  I felt this would be a good choice of wood from which to build the canvases.

  

Birch is a tight and solid wood species that grows in North America and is from the Betula Family, closely related to Beech and Oak. The two most common types of Birch are Paper and Yellow in North America but there are over 50 species found throughout the world.  Birch trees grow an average height of 70 feet with a diameter of 2”.  The bark rolls and peels spontaneously but gets thicker with age.

Birch lumber is used for many, many products from skateboards, to canoes, artist easels, paper and cabinets.  It is chosen for its fine and uniform texture.  It is nearly odorless and is also chosen for long burning fireplace wood.  Once it is dried it resist decay and fungus.  It is fairly priced and the type of Birch chosen for The Revelation Painting was Birch plywood, quarter inch.  Birch plywood is created from lamination of Birch veneer and is light but strong.  It is fine grained and pale.

 

Other parts associated with the custom wood canvases:

CONTINUOUS HINGE POLISHED BRASS FINISH

 HIGH QUALITY .04  GAUGE STEEL, 36″  BY  1.5”

SLOTTED ADJUSTMENT HOLES EVERY 9TH HOLE

1-1/2″ Metal Re-enforcing Corner Angle Plate
1-1/2 x 3/8 inch 4 hole zinc plated plates.
 

 

Brass Plate Flat Strap Hanger
Total length 1-7/8 inch Width by 1/2 inch
 
Nickel Flush Drawbolts  –   Approx. 1-1/2″ x 3″

Oddly enough, I consider this painting bringing Revelation to life and I found this interesting fact regarding Birch (from Wikipedia):

Birch trees are associated with the Tír na nÓg, the land of the dead and the Sidhe, in Gaelic folklore, and as such frequently appear in Scottish, Irish, and English folksongs and ballads in association with death, or fairies, or returning from the grave.

Read Full Post »